PDA

Visualizza Versione Completa : SPORTSTER Coppia serraggio puleggia posteriore



BORNFREE
28-08-2013, 10:31
Ciao raga qualcuno sa dirmi la coppia di serraggio esatta della puleggia di trasmissione attaccata al cerchio posteriore di uno Sporty R serie nuova dal 2004? Tante grazie in anticipo

BORNFREE
28-08-2013, 19:33
Nessuno che abbia un manuale d'officina??

JammedGeko
28-08-2013, 19:48
Nessuno che abbia un manuale d'officina??

Per la serie nuova non ce l'ho, solo pre 2003

Catosimo
28-08-2013, 20:52
Avevo scritto un commento . e adesso scopro che è sparito , ho sbagliato ma non so dove...

lvlao
28-08-2013, 21:23
Ciao raga qualcuno sa dirmi la coppia di serraggio esatta della puleggia di trasmissione attaccata al cerchio posteriore di uno Sporty R serie nuova dal 2004? Tante grazie in anticipo

Da un manuale per XL2005


ITEM ------------------------------------- TORQUE ----------------------------- NOTES
Rear sprocket screw (cast wheel) -----55-65 ft-lbs 74.6-88.2 Nm --------- LOCTITE 262, page 2-15

Assembly (page 2-15)

Laced Rear Wheel

If wheel was disassembled, reassemble hub, rim, spokes and
nipples, and tighten spokes.
See 2.5 WHEEL LACING: 16 INCH RIM.

Cast or Laced Rear Wheel

Cast wheel: see Figure 2-10. Laced wheel: see Figure 2-11.

1. Install wheel bearings (6) and bearing spacer (14), if
removed. See SEALED WHEEL BEARINGS, which follows.

2. If brake disc (10) was removed, install brake disc on
valve stem side of wheel.
a. Apply a drop of LOCTITE THREADLOCKER 243
(blue) to each of the five screws (15).
b. Tighten to 30-45 ft-lbs (40.7-61.1 Nm).

NOTE
Sportster models sold in the Japanese market are equipped
with rear wheel compensating sprockets. See Appendix D for
the correct assembly/installation procedure.

3. If rear sprocket (7) was removed, install sprocket on side
of wheel opposite valve stem.
a. Apply two drops of LOCTITE THREADLOCKER 262
(red) to each of the five screws (2). Install sprocket
using screws and washers (4).
b. Tighten screws to 55-65 ft-lbs (74.6-88.2 Nm).

4. Verify that wheel assembly is true. See 2.8 TRUING
LACED WHEELS or 2.9 CHECKING CAST RIM
RUNOUT.

5. Install tire, if removed. See 2.10 TIRES.

freedomharley
28-08-2013, 21:24
[

BORNFREE
29-08-2013, 19:49
Grazie mille raga